SAF 2507, is a 25Cr duplex (ferritic-austenitic) stainless steel. The nominal chemical composition of SAF 2507 is 25% chromium, 7% nickel, 4% molybdenum and other alloying elements such as nitrogen and manganese.[1] The UNS designation for SAF 2507 is S32
LEARN MORE
Duplex Stainless steels have a structure of half ferrite and half austenite, which means this kind of steel has a body centered cubic crystallographic structure and a face centered cubic crystallographic structure.
LEARN MORE
15-5PH, is a martensitic precipitation strengthened stainless steel, with exceptional room temperature strength and good mechanical properties up to 300°C (572°F). This kind of steel is characterized by having good corrosion resistance and excellent mecha
LEARN MORE
Grade 420J1 stainless steel is a high-carbon steel with a minimum chromium content of 12%. Like any other stainless steel, grade 420 can also be hardened through heat treatment. It offers good ductility in its annealed state and excellent corrosion resist
LEARN MORE
316L have chemical composition corresponding to ASTM F138 “Standard Specification for Wrought 18Cr-14Ni-2.5Mo Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)”. This kind of stainless steel is characterized having a good corrosion resistanc
LEARN MORE
17-4 PH is a martensitic, chromium-nickel-copper precipitation-hardening stainless steel. 17-4 PH stainless steel is capable of attaining a wide range of strength and toughness properties depending on the precipitation or aging temperature used in hardeni
LEARN MORE
Corrax is a stainless steel developed for Additive Manufacturing, and is a corrosion resistant iron-based powder used in the DMLS process. Corrax is a tooling grade steel characterized having a good corrosion resistance combined with high strength and har
LEARN MORE
Invar 36 is a 36% nickel-iron alloy possessing a rate of thermal expansion approximately one-tenth that of carbon steel at temperatures up to 204°C.
LEARN MORE
1.2709, a martensite hardenable steel, has a chemical composition corresponding to US classification 18% Ni maraging 300, European 1.2709 and German X3NiCoMoTi 18-9-5. This steel is characterized by having excellent strength combined with high toughness,
LEARN MORE
Super Austenitic Stainless Steel powder for AM and PM.
LEARN MORE
Super Duplex Stainless Steel powder (UNS S32205, UNS S32750) for AM & PM.
LEARN MORE
Nitrogen Gas Atomized powders, spherical powders, good flowablity,cost effective
LEARN MORE
Due to the advanced EIGA and VIGA process together with the experience of the operators, the powders of AMC are of high purity.
Spherical powders of AMC are recognized by clients because of their high sphericity, high density and high flowablity.
Our approved process allows us to sieve and classify powders in a controlled and continuous operation.
Our facilities enable powder production in industrial quantities that meets the most demanding criteria.